Measuring voltage :20... 1000 V DC 1 V per step
Voltage generation accuracy
The current is less than 100 microns over the entire voltage range Polarity
Ground generator pole
DC residual ripple< 1% current < 100 μ M
dynamic stability:For department = ± 10% measurement voltage change < ± 1%
Measure the maximum strength in the circuit 2 MA-20%
Maximum capacity of measured sample< 100 μ f (< 10 seconds) discharge time)
Discharge resistor
Delay
Permanent mode
The lifting time is suitable for measurement. The output voltage is equal to the setting. The measurement will stop only when the user requests to stop the test on the front red button.
Vehicle mode
The test consists of three consecutive steps during which the voltage rises in a straight line to the desired value ("rise"), remains at the programmed value ("hold"), and then gradually drops to 0 ("drop").
Up and down programming: 1 Less than 0.1 seconds.
accurate :+/-20 MSEC
0755-23012596
粵ICP備20005031號(hào)